今天宅在家裡思考微距拍攝
光源以及佈光範圍等想法
原本使用SB-700在拍攝微距時,會有一個問題
閃光燈的位置過高,佈光到鏡頭前的攝影物,除了陰影外,光源也不是很充足
後來個人拍攝微距時,是將SB-700綁在鏡頭上,使用頂閃CMD功能觸發閃光燈
不過拍攝起來的效果,感覺較硬
所以上網搜尋微距柔光罩等資料
然後量測閃光燈與鏡頭等距離
簡單設計DIY柔光罩
SW 設計圖樣

展開圖

準備材料
黑色瓦楞板600x500x5mm NT:50
白色珍珠板A4 NT:12
鋁箔膠帶1捲 NT:35

裁切後

沿圖面切斷一面的作為折角,內側貼上鋁箔膠帶
折好後細縫用膠帶固定住
前方上珍珠板或白色瓦楞板(後來發現瓦楞板透光比較好,珍珠板吸收的太多光)
後方連接閃光燈的地方用橡皮筋稍微固定住
完成

---------以下是各配置拍出來的效果------------------
配備均為D600+sigma 150 macro
ISO800 f14 1/320 閃光燈EV+1.0
均為JPG直出後修改尺寸與上框
1.閃光燈直接安裝,並安裝上原廠肥皂盒


2.直接將SB-700綁在鏡頭上,開起頂閃CMD功能 CMD功能只觸發閃燈,頂閃無作用


3.DIY柔光罩


照片比較暗請見諒,除了光圈跟快門設定上的緣故,還有室內光源不是很充足
DIY柔光罩效果上確實柔和許多,但是WB跑掉了
不過相較之前綁在鏡頭上的效果,畫面還是較暗
會使用ISO800 1/320 F14 是因為我這顆sigma 150沒有防震,而且通常去野外拍只用單腳架或是手持
現在在想,倒底要怎樣靠單燈佈光充足,還是說需要用上而外的閃光燈
請有經驗的網友給點建議~~~謝謝
以上就是小的的拙作
#不過這個柔光罩很便宜就可以完成就是了 總花費:NT約100
This entry passed through the Full-Text RSS service - if this is your content and you're reading it on someone else's site, please read the FAQ at fivefilters.org/content-only/faq.php#publishers.